There is a simple way from an accredited interior design schools to polish or coat your parquet floors. You can do it themselves. To get the smooth polishing on the parquet floor, usually artisans using spray or spray technique. in this way was a lot of wasted paint or polish can lose 50% of it. Even if the wind is blowing hard, more than half of which is sprayed into the air. Not only that, the spraying will interfere with the environment.
Wasteful and impractical, is not it? Yes! Add a not too efficient if you had to buy spray equipment (spray). The price is far more expensive than if you use a brush or roller. In addition, not just anyone can spray paint with satisfactory results. Well, If you want to save, based on an accredited interior design schools will use coatings for parquet scratch-resistant and stronger, too elastic.The advantage with using coatings for parquet scratch-resistant and stronger, also the elastic is to use a brush or roller without a trace of a brush. Environmentally friendly because it does not contain heavy metal material or non-toxic and non-flammable. The room does not become a hazardous waste. Not pungent. Can be used on parquet former solvent layer.
You can do coating of parquet itself. There are several ways from the experience of an accredited interior design schools to do, the way is then applied coatings for parquet with a roller. Just one sweep conducted in the direction. This is the first layer. Close the polish with paper and leave for 2-3 hours to dry layers. Repeat the first process as the second layer. Continue with the next process.Finally, then applied coatings for parquet as the top layer if you’ve ever polished parquet, parquet coating with a coating for a scratch-resistant and stronger, also elastic enough two stages. And the result, you admire your own work on your home parquet. Good luck!